Feb

How to choose Enterprise WLAN Management Solutions

Management of the wireless infrastructure as manage other network devices, but unfortunately the number of wireless access point devices are usually far exceed the number of an existing switch or router. Therefore, to provide wireless real-time wireless access means that two or three times the amount of equipment needed to manage, update, configuration.

After you have to worry about overlapping coverage and channel distribution issues in order to ensure the provision of reliable services, while the security is not to be ignored. Manage a wireless network and wired network management, like time-consuming, but only adds wireless functionality does not mean that results could be achieved.

The good thing is wireless management do not need to manually log on each access point implementation of configuration changes or firmware updates. If your environment is part of only a single provider's network, then the supplier will normally access point for their own proprietary wireless management products offer a single point of management and control, and this is worthy of their capital contribution. Mixed environment is also the option of using interoperable third-party products.

In this article, we will explain the available wireless management program.

Performance

eyes of the beholder, wireless management is a very broad concept. With central management, for example, by low consumption of the wireless infrastructure to provide better control. Centralized point of access control is also conducive to security management. If it is from a single access point to control the entire wireless network, then have the following for your reference:

a new access point deployment.

on all devices one-click configuration updates.

for all devices one-click firmware update.

quick to deploy VLAN and SSID.

pairs that can detect threats to the implementation of safety monitoring, such as: intrusion, Pirates of the net.

When all the access points can see each other the following attributes, the network is optimized to achieve:

signal strength adjustment

wireless channel optimization

Isolated interference

In addition to rapid deployment of access points and from a central location to manage, certain products that are for the protection of network security and optimize network quality and provide a very high-level tool. These are often the user access point controller, the streamlining of style.

specified by the supplier in a specific area, you can also use thin-client access point. Cisco Systems, ArubaNetworks companies such products is not the only centralized management capabilities. Streamline-based customer access points are not required to log on to each device configuration. They started, from a central server to obtain configuration information, and then to operate. The difference here is that the central management device is not simply log on and then run the command only, it will start when the configuration information provided to the remote and firmware, and then obtain a positive contact with the access point in order to obtain status information when running.

Normal or fat client's wireless access point is we all want to have a complete access point. In order to focus management of these devices, you must purchase the software or write a script, and then they are alone in each device to log on and execute commands. One advantage of an isolated access point is that they do not require the use of control equipment to help its operation, and therefore does not produce a single point of failure.

thin-client model is one major advantage, the central endpoint to know how to complete each device is configured, but also, as the case-to-end real-time adjustment. If there is access point failure, it can start from the endpoint to another endpoint recently. If the detected conduct forcible access it through the access point near the anti-intrusion measures for the implementation of forced access is disabled access point.

vendor-neutral sex

With the rich client, many vendors can provide centralized management tools, and these tools can remotely log in and automatically configure the access point. However, if you want to use multiple brands of access points, it is not impossible, but can be centrally managed access points of different brands of products rarely. ManageEngine products WiFiManager is one of them.

Choose a claimed structure to manage multiple brands of products are not easy. Even to find such a compatible product, you are not sure whether all the capabilities of the device can be on the same platform support. When upgrades of the software must also be carefully chosen to ensure that the management software can fully support the purchase of the access point.

Suppose you find an access point with the existing management software to achieve good compatibility, it is undoubtedly a great blessing. Because you can not be subject to a single supplier may be based on needs and budget, to postpone the deployment of new access points of time.

If there is no restriction in the budget, but also for the suppliers have no objection, then choose the same brand of access point is undoubtedly the smallest obstacles. Third-party solution is often non-existent compatibility issues. Most companies are beginning to purchase a small number of access points, and then follow the way of management of other network devices to manage, but often the number of access points will show rapid growth. Therefore, from the outset to choose a program can be used for the entire network in order to always use the appropriate supplier or support management software access point.